When drilling into 1-1/2" thick material, adjust the jig to the 1-1/2" depth setting and use 2-1/2" pocket hole screws to attach. Whenever drilling into 3/4" thick material, adjust the pocket hole jig to the 3/4" depth setting and use 1-1/4" pocket hole screws to attach. Measure and cut the side rail detail to length, drill 1-1/2" pocket holes into the ends and attach with 2-1/2" pocket hole screws. Welded metal brackets, 2x4’s, sheetrock, and castors. Finally, attach the last stile to the side panel with 2-1/2" pocket hole screws. Rolling wall created for a painter in SoHo, NY as a studio divider and a display surface. Attach the plywood to the side rails and legs with 1-1/4" pocket hole screws. Attach the side rails to the legs with 2-1/2" pocket hole screws. Drill two 1-1/2" pocket holes into the ends the side rails and stiles. It offers about 200-square-feet living space and a loft bedroom accessed by a spiral staircase. In the photo below, I am using a scrap piece of 3/4" thick wood underneath the side apron, so that the side apron will be flush to the interior side of the legs.Īdditionally, drill 3/4" pocket holes into all four sides of the plywood side panels. This simplistic tiny house on wheels sits on an 8×24 trailer and is made from salvaged materials like corrugated metal sheeting on the exterior and a large metal tub in the bathroom. Using a pocket hole jig, drill 3/4" pocket holes into the side aprons and attach them to the legs with 1-1/4" pocket hole screws. Cut the plywood side panels to size as well. Using the cut list provided, cut the legs, side aprons, side rails and stiles to length.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |