You’ll see a harness plug in somewhere around there. In most vehicles this switch is located in the master cylinder. The pressure differential switch measures the difference in pressure between the two circuits and will report that there is a difference by turning on your Accent’s brake warning light. That way, if the brake system gets a leak or fails, you still have brakes on half of your Accent’s wheels. These circuits cut the brake system in two. Your brake system is divided into two circuits. The leak can get worse over time and lead to brake failure. Just remember, it had to leak out somewhere, and that adding fluid without fixing the problem is just a temporary solution. If the brake fluid is leaking out over the brake pads and shoes, it means poor brake performance. If the brake fluid looks like it is all the way out, you’ll need to add more, bleed the brakes, and ideally fix the problem so that you aren’t repeating all of this again. Now if it is low, but not empty, adding more may provide a temporary fix. Since you’ve already checked the emergency brake handle, now it’s time to check the master cylinder and see if the brake fluid is low or not. Either the brakes need bled, or there is a leak. If the brake light is only coming on when you push the brakes, that’s a definite indication that the pressure in the brake system is too low. You’ll feel a loss of pressure that manifests itself in the form of a “mushy” brake pedal. The brake warning light indicates that your Accent has detected that one of its major brake components has failed, typically detected through a loss of pressure. Hyundai Accent Brake Warning Light Causes Doing so may lead to injury when the brakes fail. We do not recommend driving with this light on at all. The brake light is perhaps the most important warning light of all. Now if the emergency brake didn’t fix the situation, it’s time to look into what is causing your Accent’s brake warning light to stay on. Check to make sure that there isn’t the little bit left that it needs to turn the brake light off. If the handle isn’t all of the way down, it’ll cause the brake warning light to stay on. If it’s engaged, the brake light will stay lit. If you are reading this article trying to figure out whether you should drive your vehicle, check the emergency brake first. The brake light indicates that there is a problem with the physical braking system itself. It is different than the anti-lock brake system, which gets its own ABS warning light. Your Hyundai Accent‘s brake light indicator is there to let you know that there is an issue with the brake system.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |